Converting Toyota Vios Fog Lamps From HID to LED Bulbs
I’ve decided to convert the Toyota Vios fog lamps HID 5000K to LED bulbs after 3 years due the bad reliability of the HID ballast . I’ve ordered the H11, LED bulbs from lelong.com.my that cost me RM141.00.
Now, let’s us get into the DIY procedure.
Installation procedures for Toyota Vios Fog lamps with H11 Bulbs
1. Remove 2 screws at the Toyota Vios side of front bumper and 4 screw at bottom.
2. Remove 4 pin bumper clips at the top of Toyota Vios front bumper.
3. Loosen the Toyota Vios front bumper from the car’s chassis:
4. Remove the HID ballast and the bulbs at the Toyota Vios fog lamps.
5. Prepare to install the LED bulbs into the fog lamps.
Before we proceed for the installation, sealed up the LED bulbs with silicon glue to prevent moisture of water from sip in to the bulbs.
6. Wipe off the excess sealant on the H11 LED bulbs.
7. Modified the H11 bulbs male connector since I am using the existing HID connector. Cut off the center point of the connectors that blocking the female connector from connecting it with cutter. Be careful as I hurt-ed my finger during the cutting process.
8. Once the modification of the LED bulbs connector is completed, then I proceed to connect the LED bulbs to the female connector and tested the bulbs connectivity by switch ON the fog lamps.
9. Assemble the LED bulbs into fog lamps housing and put back the Toyota Vios front bumper.
Toyota Vios LED fog lamps installation is completed!
The reason I am choose LED bulbs over of normal halogen bulbs due to LED bulbs are more reliable and brighter than halogen bulbs. The whole process took me around 3 hours to complete the installation.
Don’t forget to give us a ‘Like’ at bottom of the post 🙂
Hello Guys,
I need help finding out what bulb type for my 2016 Vios Projector Headlight Assembly
Thanks
It pretty standard, is H4 bulb too
sir, sana maglagay ka ng youtube guide, i mean video guide to remove bumper ng vios
Hi Hamdains,
is pretty straight forward to remove bumper.
Just take out the bumper clips at the fenders and on top the front bumper, then remove the entire bumper.
Really help me so much for your info. Thx for Sharing Bro! I am from Sabah, KK. keep in touch with any new sharing. 🙂
Hi Kevin,
I get the H11 LED in accessories shop… H11 is standard bulb size for most of the car's fog lamp, you should be able to get it.
H11 Osram won't spoil the fog lamp as HID bulb. HID bulb produce intensive heat during operating, thus will damage the cover lens of the fog lamp.
Hope my advise helped you 🙂
Thx so much from your info. Appreciated. where you get the H 11 LED? if I use H 11 Osram Bulb Night Breaker Unlimited, izit will spoiled my fog lamp?
Hi Kevin,
yes, the new Toyota Vios Club Malaysia (TVCM) 2014 fog lamp size is H11 as well.
Thx your so much from your information. But,will harm and spoil my fog lamp by using Osram Bulb Night Breaker Unlimited? Cause last time I used HID my fog lamp get spoiled.
New Toyota Vios can fog lamp can fit with H 11 Osram Bulb?
By choosing HID bulb you have taken a wise decision because HIDs are bright lights and which used to come in premium cars only. They are available at affordable prices. Also, thank you very much for displaying the step by step process of changing the bulb.
No problem William!
Hope to see you around again 🙂